Technical Plastic Material Information South Africa.The plasticsportal of South Africa is plastics directory cpvc,chlorinated polyvinyl chloride,cpvc properties,cpvc datasheet of properties,material properties of cpvc on Plastixportal.
Thermoplastic
Service temperature of 90°C (190°F), accompanied by self-extinguishing properties. Reasonable weathering performance.
More difficult to process than UPVC or Plasticised PVC.
PVC is the most widely used member of the vinyl family. It is most commonly used in pipe and fittings. PVC offers excellent corrosion and weather resistance. It has a high strength-to-weight ratio and is a good electrical and thermal insulator. PVC is also self-extinguishing per UL flammability tests. PVC may be used to temperatures of 140°F (60°C) and is readily available in sheets, rods, and tubing. PVC may be cemented, welded, machined, bent and shaped readily.
Property |
Value |
Density (g/cm3) |
1.52 |
Surface Hardness |
RR120 |
Tensile Strength (MPa) |
58 |
Flexural Modulus (GPa) |
3.1 |
Notched Izod (kJ/m) |
0.06 |
Linear Expansion (/°C x 10-5) |
7 |
Elongation at Break (%) |
30 |
Strain at Yield (%) |
5 |
Max. Operating Temp. (°C) |
90 |
Water Absorption (%) |
0.1 |
Oxygen Index (%) |
50 |
Flammability UL94 |
V0 |
Volume Resistivity (log ohm.cm) |
14 |
Dielectric Strength (MV/m) |
14 |
Dissipation Factor 1kHz |
0.025 |
Dielectric Constant 1kHz |
3.1 |
HDT @ 0.45 MPa (°C) |
110 |
HDT @ 1.80 MPa (°C) |
105 |
Material. Drying hrs @ (°C) |
2 @ 75 |
Melting Temp. Range (°C) |
220 - 240 |
Mould Shrinkage (%) |
0.5 |
Mould Temp. Range (°C) |
40 - 70 |
NOTE: The information contained herein are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. All values at 73°F (23°C) unless otherwise noted.
Buyers use online platforms and market places to source
products and find new suppliers
Market your business on Plastixportal.
