HDPE material properties,hdpe datasheet, hdpe, high density polypropylene, hdpe typical properties, hdpe material properties on Plastixportal.Search for HDPE material properties, high density polypropylene and more on Plastixportal.
High Density Polyethylene (HDPE)
Representing the largest portion of the polyethylene applications, HDPE offers excellent impact resistance, light weight, low moisture absorption, and high tensile strength. HDPE is also non-toxic and non-staining and meets FDA and USDA certification for food processing.
Thermoplastic
Good low temperature impact resistance. Excellent chemical resistance.
Susceptible to stress cracking. Has lower stiffness compared to Polypropylene. High mould shrinkage and poor UV resistance.
Representing the largest portion of the polyethylene applications, HDPE offers excellent impact resistance, light weight, low moisture absorption, and high tensile strength. HDPE is also non-toxic and non-staining and meets FDA and USDA certification for food processing.
Polyethylenes are semi-crystalline materials with excellent chemical resistance, good fatigue and wear resistance, and a wide range of properties (due to differences in length of the polymer chain.) Polyethylenes are easy to distinguish from other plastics because they float in water.
Polyethylenes provide good resistance to organic solvents, degreasing agents and electrolytic attack. They have a higher impact strength, but lower working temperatures and tensile strengths than polypropylene. They are light in weight, resistant to staining, and have low moisture absorption rates.
Property |
Value |
Density (g/cm3) |
0.96 |
Surface Hardness |
SD68 |
Tensile Strength (MPa) |
32 |
Flexural Modulus (GPa) |
1.25 |
Notched Izod (kJ/m) |
0.15 |
Linear Expansion (/°C x 10-5) |
12 |
Elongation at Break (%) |
150 |
Strain at Yield (%) |
15 |
Max. Operating Temp. (°C) |
55 |
Water Absorption (%) |
0.02 |
Oxygen Index (%) |
17 |
Flammability UL94 |
HB |
Volume Resistivity (log ohm.cm) |
17 |
Dielectric Strength (MV/m) |
22 |
Dissipation Factor 1kHz |
0.0005 |
Dielectric Constant 1kHz |
2.3 |
HDT @ 0.45 MPa (°C) |
75 |
HDT @ 1.80 MPa (°C) |
46 |
Material. Drying hrs @ (°C) |
NA |
Melting Temp. Range (°C) |
220 - 310 |
Mould Shrinkage (%) |
3 |
Mould Temp. Range (°C) |
30 - 70 |
NOTE: The information contained herein are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers' complete material property datasheets.
All values at 73°F (23°C) unless otherwise noted.
Buyers use online platforms and market places to source
products and find new suppliers
Market your business on Plastixportal.